Bad plumbing comes with several associated problems. Unfortunately, many property owners don’t realize that plumbing issues can end up wasting water, causing problems for the environment, and increasing their monthly expenses.
You can learn more about the reasons for water waste and consider options to address the problems from a company that offers plumbing services in Levittown, PA. Contact Davis Home Services for help today when you call us at 844-226-9872.
Dripping Faucets Cause You to Waste Water
Many people find a dripping faucet annoying. The steady noise of water falling into a sink can get on anyone’s nerves. In addition to causing irritation, a single dripping faucet can waste water every day.
Research shows that it takes about 15,000 drips to add up to a gallon of water. For example, let’s say you have a faucet in your home that drips only 20 times an hour. These tiny drips add up. Within a year, the spout would waste around 700 gallons of water.
You can directly address this issue by reaching out to a plumber to tighten up the leaky faucet. Plumbers can also look for other signs of leaking throughout your property.
Many Property Owners Have Leaks in Their Piping
Over time, the pipes in your home may wear out or begin to break down, leading to minor leaks. Unfortunately, improperly installed plumbing often breaks down more quickly. According to the Environmental Protection Agency (EPA), some people waste around 90 gallons of water a day due to leaks.
Ninety gallons represent a lot of water. If you have a severe leak, you may find signs of water damage, such as stains on your walls or strange smells. However, some leaks form where you can’t easily see them, like in a basement or crawlspace area.
You may only notice the leak in this situation when your water bill begins to rise. Our team can handle leaks that release various amounts of water into your property. Contact us now to learn more.
Stop Wasting Water with These Tips
Many people end up wasting household water because they have older or out-dating plumbing fixtures in their homes. However, you can take steps to support water conservation by upgrading your plumbing in several ways and taking care of recent advances in plumbing technology.
Consider a New Toilet
Older toilets use a lot of water. Studies show that many people use as much as 40% of their daily water for the toilet. You have options to reduce this amount of wasted water by switching your current models for low-flow toilets or dual-flush toilets.
Low flow toilets use around half as much water as older toilets. On the other hand, dual-flush models give you two settings: one to use for liquid waste and one for solid.
Install Low-Flow Showerheads
Showers use around 20% of the clean water in most homes. However, the total amount of water you use may vary based on how many people live in your home and their preferred shower length. Longer showers run through more water.
Some showers, including waterfall-style options, use even more water. Fortunately, you can minimize the moisture lost while showering by installing a low-flow showerhead. As a result, these showers reduce the amount of water waste.
To avoid wasting water, the experts recommend keeping all showers to about ten minutes, even with low-flow showerheads.
Add Faucet Aerators to Your Sinks
Faucet aerators add a screen in front of the end of faucets around your home. As the name suggests, the aerator adds air to the water coming through the spout. Adding add breaks up the water, reducing the total water you use while maintaining a strong flow.
Faucet aerators can reduce lost water by up to 60%, making them one of the most efficient changes you can make around your home to reduce water waste. In addition, many people can easily install aerators on their own, covering sinks in the:
- Mudroom or garage
Some property owners only use aerators on a few facets. The choice about how many to use rests in your hands.
Adjust the Water Pressure in Your Property
Water cycles through your plumbing system as you run the dishwater, do laundry, or take a shower. You can avoid wasting water through these everyday processes by adjusting the pressure for your water.
Lowering the water pressure through your home may take some getting used to at first. For example, many people are used to high-pressure showers and water from the sink. However, reducing the pressure helps you use less water, lowering your water bills and protecting the environment.
Replace Older Appliances
Finally, you may be able to reduce water waste around your home by upgrading your current appliances, particularly washing machines and dishwashers. Both of these appliances rely on water, and older models often function inefficiently.
Companies design newer models to use less water, reducing your monthly expenses and preventing water waste. In addition, you can look for Energy Star-approved appliances if you’re considering upgrading your system.
Consider a Recirculation Pump
Some property owners have the professionals install a recirculation pump to reduce water waste. These pumps help your system provide hot water more quickly. Homeowners with a pump don’t have to let the cold water run so long before the hot water arrives, saving money in the long run.
Similarly, you may consider insulating your pipes. Insulation keeps the water in your home warmer, so you do not have to allow cold water to run down the drain while waiting for the hot water to arrive.
Speak to Us About Options to Reduce Water Waste in Burlington
Are you interested in preventing water waste, taking care of the environment, and reducing your water bills? Learn about basic water-saving tips with our team of plumbing professionals. We can repair leaks and provide you with expert tips.
Call Davis Home Services at 844-226-9872 about wasting water in Cherry Hill, NJ.